tóng-àn:26396 PIA24980-webTopography an Between Mars Helicopter and Rover for Flight 17.jpg

Choân kái-sek-tō͘(1,060 × 1,060 siōng-sò͘ , tóng-àn chiàm-liōng: 345 KB, MIME luī-hêng: image/jpeg

Khài-iàu

Soat-bêng
English: Topography an Between Mars Helicopter and Rover for Flight17

This annotated image from NASA’s Mars Reconnaissance Orbiter (MRO), and the topographic map below it, provide a look at the altitude of surface features standing between the agency’s Perseverance Mars rover and Ingenuity helicopter at the conclusion of the rotorcraft’s 17th flight at Mars on Dec. 5, 2021.

In the image of the surface – taken by MRO’s High Resolution Science Experiment (HiRISE) camera – Ingenuity’s flight path is depicted in yellow. Perseverance’s location is indicated in the upper left, with the blue line delineating its line of sight to the helicopter’s landing spot. The location of the tallest point on Mars’ surface between rover and helicopter during its final descent is the hill near the center of image that the Perseverance science team has nicknamed “Bras,” after a city in France.

The topographic map below the orbital image provides the elevation of surface features along the blue line, or Perseverance’s line of sight to helicopter. The height measurements to the left of the map are derived by comparing local elevations to the areoid (a model for an equipotential surface of Mars, analogous to “sea level” on Earth). The Ingenuity team believes the 13-foot (4-meter) height difference between the Perseverance rover and the top of Bras contributed to the loss of communications when the helicopter descended toward the surface at the end of its flight.

The image’s background terrain was generated using data collected by the HiRISE camera aboard NASA's Mars Reconnaissance Orbiter.

The University of Arizona, in Tucson, operates HiRISE, which was built by Ball Aerospace & Technologies Corporation, in Boulder, Colorado. NASA’s Jet Propulsion Laboratory, a division of Caltech in Pasadena, California, manages the Mars Reconnaissance Orbiter Project for NASA's Science Mission Directorate in Washington.

The Ingenuity Mars Helicopter was built by JPL, which also manages the technology demonstration project for NASA Headquarters. It is supported by NASA's Science, Aeronautics Research, and Space Technology mission directorates. NASA's Ames Research Center in California's Silicon Valley, and NASA's Langley Research Center in Hampton, Virginia, provided significant flight performance analysis and technical assistance during Ingenuity's development. AeroVironment Inc., Qualcomm, and SolAero also provided design assistance and major vehicle components. Lockheed Martin Space designed and manufactured the Mars Helicopter Delivery System.

Credit

NASA/JPL-Caltech
Ji̍t-kî
Chhut-chhù https://mars.nasa.gov/resources/26396/topography-between-mars-helicopter-and-rover-for-flight-17/
Chok-chiá NASA/JPL-Caltech

Siū-khoân

Public domain 本作品由NASA創作,屬於公有領域。根據NASA的版權政策:“NASA的創作除非另有聲明否則不受版權保護。”(參見:Template:PD-USGov/zhNASA版權政策JPL圖像使用政策
警告:

說明

添加單行說明來描述出檔案所代表的內容
Topography an Between Mars Helicopter and Rover for Flight 17

在此檔案描寫的項目

描繪內容 繁體中文

多媒體型式 繁體中文

image/jpeg

校驗和 繁體中文

507183eac017b4a037a6f89daa63d65d94126b38

斷定方法 繁體中文: SHA-1 中文 (已轉換拼寫)

資料大小 繁體中文

353,782 Byte

高度 繁體中文

1,060 ōe-sò͘

寬度 繁體中文

1,060 ōe-sò͘

Tóng-àn le̍k-sú

Chhi̍h ji̍t-kî/sî-kan, khoàⁿ hit sî-chūn--ê tóng-àn.

Ji̍t-kî/Sî-kanSáuk-liŏk-dùChióh-cháungIōng-chiáChù-kái
hiān-chāi2021-nî 12-goe̍h 9-ji̍t (pài-sì) 15:192021-nî 12-goe̍h 9-ji̍t (pài-sì) 15:19 bēng-buōng gì sáuk-liŏk-dù1,060 × 1,060(345 KB)ChinakpradhanUploaded a work by NASA/JPL-Caltech from https://mars.nasa.gov/resources/26396/topography-between-mars-helicopter-and-rover-for-flight-17/ with UploadWizard

Í-hā ê ia̍h liân kàu chit ê iáⁿ-siōng:

tóng-àn hō͘ lâng sái--ê chōng-hóng

Ē-kha--ê kî-thaⁿ wiki ēng tio̍h chit--ê tóng-àn:

Nguòng-só-gé̤ṳ