Pang-bô͘:Chembox CalcTemperatures/doc/parameter list

This parameter list:

Four or less parameters are needed to present temperature data:

|MeltingPt=Decomposes when >
|MeltingPtC=50
|MeltingPt_ref=<ref>[www.example.com]</ref>
|MeltingPt_notes=My notes<ref>[www.chemspider.com]</ref>

Decomposes when >_50 °C (122 °F; 323 K)[1]_My notes[2]

The options for conversion:
|MeltingPtC=50
|MeltingPtF=50
|MeltingPtK=50
Temperature range:
|MeltingPtC=50 to 70
|MeltingPtF=50 to 70
|MeltingPtK=50 to 70


50 °C (122 °F; 323 K)
10 °C; 50 °F; 283 K
−223.2 °C; −369.7 °F; 50.0 K

50 to 70 °C (122 to 158 °F; 323 to 343 K)
10 to 21 °C; 50 to 70 °F; 283 to 294 K
−223.2 to −203.2 °C; −369.7 to −333.7 °F; 50.0 to 70.0 K

| Section = {{Chembox Properties
| MeltingPt =
| MeltingPtC =
| MeltingPtF =
| MeltingPtK =
| MeltingPt_ref =
| MeltingPt_notes =

| BoilingPt =
| BoilingPtC =
| BoilingPtF =
| BoilingPtK =
| BoilingPt_ref =
| BoilingPt_notes =
  }}
  {{Chembox Properties}} - all temperature parameters
Any text for melting point value
Temperature, number only. Can be a range: '100 to 200'
 number, when in degrees Fahrenheit
 number, when in kelvins
References (always shows, right after calculations or 'any text')
Notes (always shows last; can include references)

Any text for boiling point value
Temperature, number only. Can be a range: '100 to 200'
 number, when in degrees Fahrenheit
 number, when in kelvins
References (always shows, right after calculations or 'any text')
Notes (always shows last; can include references)
 
| Section = {{Chembox Hazards
| FlashPt =
| FlashPtC =
| FlashPtF =
| FlashPtK =
| FlashPt_ref =
| FlashPt_notes =

| AutoignitionPt =
| AutoignitionPtC =
| AutoignitionPtF =
| AutoignitionPtK =
| AutoignitionPt_ref =
| AutoignitionPt_notes =
  }}
  {{Chembox Hazards}} - all temperature parameters
Any text for Flash point value.
Temperature, number only. Can be a range: '100 to 200'
 number, when in degrees Fahrenheit
 number, when in kelvins
References (always shows, right after calculations or 'any text')
Notes (always shows last; can include references)

Any text for autoignition temperature value
Temperature, number only. Can be a range: '100 to 200'
 number, when in degrees Fahrenheit
 number, when in kelvins
References (always shows, right after calculations or 'any text')
Notes (always shows last; can include references)